| Pad Printing Materials>Steal Plates | ||||||||||||
| PRE PRODUCT NEXT PRODUCT | ||||||||||||
 |
|
|||||||||||
| Product Description |
|
Packing︰ Wooden case Usage︰ Used by Open-ink tray pad printer. Design and drawing document etched on the surface of pad plate . Installed it to the pad printer. Technical Parameter︰ 1 Thickness: 10.0-10.5mm; 2. Rouhness concentration ofSurface: 0.025 Production Advantage ︰ High strength Bearing steel wrought; High wear resistance; Sophisticated structure to be etched fine imaging both streak and halftone; long life ensure low cost. Use Method︰ # Etching printing document to the surface of pad plate; # Measure the depth ; # Install into the ink tray of pad printer # Testing after adding ink Safe Caution︰ Be careful to carry because of weight Storage︰ # Inject rust-preventative oil into the surface of pad plate; # PVC or Nylon film package; # Store in drying and shady place 1、All plates are made of imported steel, high hardness, high density and high brightness. 2、Can be etched with high-definition pattern, long using life. 3、Various kinds, full range that covering plates of single side and both sides. Specification： 3"×4"、3"×5"、3"×6"、3"×7"、3"×8"、3"×9" 4"×4"、4"×5"、4"×6"、4"×7"、4"×8"、4"×9" 5"×4"、5"×5"、5"×6"、5"×7"、5"×8"、5"×9" 6"×4"、6"×5"、6"×6"、6"×7"、6"×8"、6"×9"
|
| Product Image | |||
 |
Select Image | ||
|
|||
| PRE PRODUCT NEXT PRODUCT | |||
Chat Now